These are instructions on how to make a cat 5 patch cable.
p>To make a "Patch" cable you just need to follow the EIA/TIA 568-B standard.Pins 1 & 2 and 3 & 6 from one end are connected to pins 1 & 2 and 3 & 6 on the other end.
The pinouts looking from the bottom of the cat 5 ends (White/Orange starts on the left) are as follows:
Standard End Standard End
Pin 1 White/Orange Pin 1 White/Orange
Pin 2 Orange Pin 2 Orange
Pin 3 White/Green Pin 3 White/Green
Pin 4 Blue Pin 4 Blue
Pin 5 White/Blue Pin 5 White/Blue
Pin 6 Green Pin 6 Green
Pin 7 White/Brown Pin 7 White/Brown
Pin 8 Brown Pin 8 Brown
